According to the "Environmental Impact Assessment Law of the People's Republic of China" and the "Notice of the Shandong Provincial Environmental Protection Department on Strengthening the Public Participation and Supervision of Environmental Impact Assessment of Construction Projects" (Lu Huan Han  No. 138), the project Publicity indicates the compliance of the project with the national industrial policy, the main pollution situation and the measures and effects adopted, so that the public has the right to know and participate in the project.
According to the national environmental protection laws and regulations, the environmental impact assessment of Shandong Hengfeng Rubber & Plastic Co., Ltd. with an annual output of 1.8 million sets of butyl inner tubes and mats is as follows:
I. Brief description of the construction project
(1) Project name: 1.8 million sets of butyl inner tube and pad project with an annual output
(2) Construction site: east of Mengmeng Road, Dawang Town, Guangrao County, Dongying City, Shandong Province, north of Liqiao Xicun Town Road;
(3) Construction unit: Shandong Hengfeng Rubber & Plastic Co., Ltd.
(4) Contact: Yan Dingji
(5) Contact number: 13864713378
Second, the project profile
This project uses butyl synthetic rubber and mat synthetic rubber as raw materials to produce butyl inner tube and mat products. The project does not belong to the “Encouragement Class” and “Retirement Class” projects in the “Industrial Structure Adjustment Guidance Catalogue” (2011) (amendment), to allow construction projects.
Third, the work procedures and main work contents of the environmental impact assessment work
During the operation period of the project, the exhaust gas is mainly roughing, smelting, extrusion, dusting and vulcanization; the waste water is mainly domestic sewage; the noise is mainly the noise of equipment such as vulcanizer and open mill; the solid waste is mainly waste and dust collector. Dust collection, filtration of impurities, substandard products, waste lamps, waste hydraulic oil and household garbage.
1. Exhaust gas
The exhaust gas generated by the inner tube roughing, opening and extrusion process is collected by a gas collecting hood equipped with a PVC soft curtain, and then discharged through a light oxidation catalytic device and discharged through a 15 m high exhaust pipe Y1; The dust is collected through the pipeline and discharged through a dust collector and then discharged through a 15 m high exhaust pipe Y2. The inner tire vulcanized exhaust gas is collected by a gas collecting hood equipped with a PVC soft curtain and then treated by two photo-oxidation catalytic devices. The 15m high exhaust pipe Y3, Y4 is discharged; the exhaust gas generated by the pad refining, opening and extruding process is collected by a gas collecting hood equipped with a PVC soft curtain and then passed through a photooxidation catalytic device and passed through a 15 The meter-high exhaust pipe Y5 is discharged; the gasketed vulcanized exhaust gas is collected by the gas collecting hood and then treated by two photo-oxidation catalytic devices and discharged through two 15 m high exhaust pipes Y6 and Y7; a small amount of uncollected exhaust gas passes through the workshop to Organizational emissions. The waste gas generated by the project will have less impact on the surrounding environment after being treated.
2. Waste water
The domestic sewage generated by the project will be excavated regularly after being collected by the dry toilets in the plant area, and will not be discharged.
3. Solid waste
The waste material, filter impurities, dust collector dust collection, and unqualified products are collected and sold; the waste hydraulic oil and waste lamp produced by the project are hazardous wastes, and must be entrusted to be qualified units for disposal; domestic garbage is cleared by the sanitation department.
The noise source of the project is mainly equipment noise such as vulcanizer and open mill. After effective control measures such as sound insulation and equipment damping, it will not pollute the acoustic environment around the project.
Fourth, the public feedback method
To implement the Interim Measures for Public Participation in Environmental Impact Assessment (SEPA February 14, 2006, Huanfa 2006 [No. 28]), and Shandong Provincial Environmental Protection Department on Strengthening Public Participation and Supervision of Environmental Impact Assessment of Construction Projects The relevant spirit of the Notice (Lu Huan Han  No. 138), the environmental impact assessment work of this project will be implemented online. If you can provide reasonable constructive comments on the environmental protection work of the construction project, it will be fully respected and adopted during the preparation of the EIA report.
After the announcement, if you still have new suggestions and opinions, you can still report to Shandong Hengfeng Rubber & Plastic Co., Ltd.
V. The first public feedback and explanations on public concerns and related suggestions
During the first public announcement period, the public did not receive any telephone calls, written letters or any other feedback on the environmental protection of the project, indicating that the public generally accepted the construction of the project and was optimistic about the prospects of the project.
Construction unit (seal): Shandong Hengfeng Rubber & Plastic Co., Ltd.
EIA unit: Shandong Environmental Protection Industry Group Co., Ltd.
Announcement release date: December 14, 2018